| We have added this category to our shopping cart in order to make it easier to find our products that help improve accuracy. You may find the same great products listed elsewhere in the store. |
| |
|
ECONOMY ABRASIVES KIT
The ECONOMY ABRASIVES KIT consists of the necessary abrasives in paste form, instruction manual, 10 soft lead slugging bullets and steel plates for imbedding your own bullets. This kit is sometimes called the "roll your own" kit. Used properly, the kit contains enough materials to pressure lap 10-12 barrels. Check options to select the caliber of slugging bullets you desire.
|
|
|
|
| |
|
EXD VERTICAL RETICLE
The best way to correct the vertical alignment of the cross-hairs. Well made, compact and easy to use item for the precion minded shooter and hunter.
|
|
|
|
| |
|
EXD Drop Decals
From the makers of the EXD Vertical Reticle. Two sheets of Drop decals in each pack. There are six decals on each sheet. This is a great way to have drop information readily available in the field. Use different loads and have the data at your fingertips. Easily applied to stock or scope. Make sure the area is free of oil or grease before applying. Best if placed where they won't be chafed by clothing, etc. Fill in your drop data with a fine tipped permanent marker.
|
|
|
|
| |
|
Four Abrasives Kit
Great way to firelap your muzzle loader. Kit consists of the four abrasives (#220, #400, #800, #1200 grits) in jars. The abrasives are laboratory grade abrasives and in a paste form.
|
|
|
|
| |
|
Individual jars of abrasive paste
you can purchase the jars of abrasives individually to "customize you firelapping.
|
|
|
|
| |
|
Millennium/Tumbler combination Kit
A great way to start your own moly plating. This kit includes our MILLENNIUM Moly Kit and the complete VibraShine tumbler set.
|
|
|
|
| |
|
NECO Pre-imbedded Bullet Kits
The Pre-imbedded Kits consist of 50 color coded jacketed bullets, 10 soft lead slugging bullets and an instruction manual. The color of the bullet indicates the grit that is imbedded in the jacket. Suggested loads for firelapping are in the manual.
|
|
|
|
| |
|
Soft Lead Slugging Bullets, bag of 10
The very best way to check the bore for constrictions, loose spots and rough spots is to "feel' the bore. The best way to "feel" the bore is to manually push a slug through the bore.
As you push the slug through a well greased bore, you can note where the aberrations occur and mark them on your pushing rod or dowel. As you change grits in the fire lapping process, slug the bore. You will feel the improvement brought about by the firelapping process.
|
|
|
|
| |
|
Cartridge Alignment Tool-CAT
The CAT,Cartridge Alignment Tool. Now you can accurately correct run-out of your hadloads and factory cartridges. The CAT allow you to do this easily without effecting neck tension or putting damaging pressure on the bullet. No more worries about excessive run-out. Improved accuracy. Eliminate one more cause of the unknown flyer.
The CAT,Cartridge Alignment Tool. Now you can accurately correct run-out of your handloads and factory cartridges. The CAT allows you to do this easily without effecting neck tension or putting damaging pressure on the bullet. No more worries about excessive run-out. Improved accuracy. Eliminate one more cause of the unknown flyer. Introductory price $39.95. Buy it and our Concentricity Gauge for $207.95
|
|
|
|
|
|
