Moly Coating & Plating Kits for Bullets | NECO

Moly-coat your own bullets with NECO moly plating kits - everything to burnish a molybdenum-disulfide layer onto jacketed or cast bullets to reduce barrel friction and fouling.

Click For Details

NECO Moly Plating Kit Refill Components

NECO quality replacement components for producing the best Moly plated bullets.

TEMPORARILY OUT OF STOCK

Price: $999.00

Click For Details

NECO Moly Plating Kits

The "ORIGINAL" kit for Moly plating bullets. This is the kit NECO developed years ago for processing up to 30,000 bullets. Included all the necessary components to get the Moly plating job done right. Hardened steel balls to impact plate the bullets. Laboratory grade ultra-fine Moly disulfide. Laboratory grade ultra-fine Carnauba wax for coating. Corn cob polishing media. Instruction manual. Sample bullet. The "MILLENNIUM" kit has all the same quality components as the "ORIGINAL" but in smaller quantities so it only can plate 15,000 to 20,000 bullets.

OUT OF STOCK WHILE WAREHOUSE IS MOVED

Price: $999.00

Click For Details

TUMBLER - Viking Rotary Tumbler

The Viking Rotary Tumbler is the top of the line, first class, commercial-grade lapidary tumbler which is designed to run thousands of hours with a minimum of attention. A unit in our shop has been in use for over 12 years.

OUT OF STOCK

Why Moly Coat Bullets: Less Fouling & Friction

A molybdenum-disulfide coating lowers the friction between bullet and bore, which can cut copper fouling and help extend the accurate life of a barrel. Moly coating pairs well after a bore has been smoothed by fire lapping.

The NECO Moly Plating Process

NECO moly plating kits include everything needed to bond a moly layer to the bullet surface, and refill components let you keep coating batch after batch - a burnishing process that builds the coating mechanically.

The Viking Rotary Tumbler

The Viking rotary tumbler is the workhorse of the NECO coating setup and a capable rotary tumbler in its own right. For a dry film lubricant on other surfaces, see MOLY-SLIDE dry moly lubricant.

Current moly-plating choices: Ultra-fine Moly Disulfide powder .6-.8 micron, 4 oz., Ultra-fine Moly Disulfide powder, .6-.8 micron, 2 oz., Ultra-fine Carnauba wax, 3 oz., Ultra-fine Carnauba wax, 2 oz., Hardened steel ball bearing stock, 4.5 lbs., Corn cob grit, 8 oz., Corn cob grit, 5 lbs, ORIGINAL Moly-Plating kit.

Related Categories for Moly Plating & Bullet Coating

Sitemap

www.neconos.com
NECO Cust. Svce.
108 Ardmore Way
Benicia, CA 94510

NECO Warehouse/Main Office
1015 W. Morgan St
Duluth, MN 55811

sales@neconos.com