Reloading & Ballistic Software

 QuickLOAD/QuickTARGET Unlimited Interior and Exterior Ballistics Program is absolutely the finest ballistic prediction software. User friendly program allows the handloader to accurately predict results for more than 1200 cartridges, 250 powders and 2500 bullets. Data for user created wildcats can be entered and results computed. The program is updated on an approximately 3-4/times/annual basis as developer obtains new powders/calibers from manufacturers. QuickLOAD version is 3.9 and is compatible with WINDOWS 2000, XP, VISTA, Windows 7, Windows 8 and Windows 10 and Windows 11.

BACK IN STOCK!  All permits/fees/tariffs in place.....latest shipment finally arrived.  Unfortunately, due to all the new fees and higher shipping rates, we've been forced to raise the price for the first time in 20+ years.     Shipping to Canada is now $47  

The version you receive will be the latest version or an update will be included.  SOFTWARE WILL BE IN DISK FORM.

(sorry - no refunds on opened software)             

 TECH SUPPORT IS AVAILABLE AT   QLOAD.RJD@GMAIL.COM   

WIN 11 Users - Intel and AMD processors- the software is compatible and runs properly - please refer to FAQs.

WIN 11 with ARM processers are not compatible and will NOT run the software.   

Win XP, 7, 10 and Win 11 are fully compatible. 

Win 11    25H2 as of May 2026:  Turn off anti-virus, disconnect from internet and be sure to install on C:drive   

   STILL ONLY AVAILABLE IN DISC FORM DUE TO GERMAN ITAR COPYRIGHT LAWS  

 SHIPPING is USPS Priority Mail approx. $18 +/- depending on region - yes, USPS has raised their rates again (fuel surcharges, inflation, political blah blah) We've NOT raised our product price in years.   (International rates vary and we cannot guarantee receipt once it leaves our shores) Check with us for cost - even to Canada is pricey.

PLEASE NOTE NO EUROPEAN ORDERS   Unfortunately, South African orders cannot be insured and/or guaranteed to arrive.  If you live in Europe, please order QuickLOAD/QuickTARGET from the following source: Ing. Hartmut Broemel, Neubrecker Weg 15, D-64832 Babenhausen, Germany, fax/phone (+49) 0 6073 688481 Reimer Johannsen GmbH, Haart 49, D-24535 Neumuenster Phone +49 4321 2758, Fax +49 4321 29325, Quickload Order Nr. LEW 999, in Finland by: FinnAccuracy, Nummentie 31, FIN-08100 Lohja, Phone +358 400325765, www.finnaccuracy.com, in Czech Republic by: LN Original, P.O. Box 17, 11901 Praha 012-Hrad, Phone +420 603 434 872, www.lnoriginal.com

Win 11 users please see FAQs 

QLQT Data Update download LATEST VERSION (24 APR 2026) NOW AVAILABLE NOTE: download LINK will be sent AFTER we process orders within 24 hours -  just like the disk, it is a DATA UPDATE with cumulative data to UPDATE your existing QuickLOAD/QuickTARGET program (which is still only available by disk due to ITAR regs) but with no shipping charge or waiting for USPS. The LINK/PASSWORD and INSTRUCTIONS will be sent via email and will be good for 3 days.    NOTE: You will need 7Zip on your computer - please make sure to read the directions supplied in the email link we send before downloading the link.     THEN, if you have any issues, email tech support - qload.rjd@gmail.com      

NOTE:   sorry - NO new powders. 

Cartridge-25CM and mis bullets

New Bullet lines- Virtual Precision, Twenty-nine, Ballistix and Steinbock Precision 

Now includes 8.6BLK, Berger #37401, #30487, Sierra #4625, #4681, #7725 -  Nov. addition - Bergers and Sierra Bullets - .25 x 47 Lapua 

24 APR 2026 UPDATE   (latest version) - QuickLOAD/QuickTARGET DATA UPDATE for V 3.6, 3.7, 3.8 & 3.9   This is a data update disk ONLY. It will add the latest available data to your current version of QuickLOAD.   The data contained is current as of the date ordered and or shipped. AGAIN - This a data update only. The updates occur as we obtain new information and are cumlative on your existing program - sometimes in small increments and sometimes in large increments. IF you are looking for something specific email us and ask. We are happy to answer your inquiry. info@neconos.com    NOW ALSO AVAILABLE as DOWNLOAD version (also 24APR26) - See item choice with image called 'Download file' and avoid the shipping charges that keep going up

 Note: US shipping is USPS flat rate $13.00+ - yes, they've raised their prices    International rates differ. Sorry - Canada/US customs means $40 shipping - consider the download version!

 NOTE:  no new powders   Cartridge-25CM and misc. bullets, NEW bullet lines:  Virtual Precision, Twnty-Nine, Ballistix, and Steinbock Precision  

DATA UPDATES ARE NO LONGER AVAILABLE.  This software has been retired and is no longer supported.  The only option (other than purchasing a new program) is to UPGRADE these older versions at a very reasonble cost.  This UPGRADE updates the COMPLETE software and data to the current version at the time of order and allows future data updates to be installed.  The software will be able to run on Windows XP, Vista, 7, 8, 10 and 11. You will need to provide the serial number of your original disk.  The serial number provides required updated info for copright compliance.  PLEASE CONTACT US FOR ACTUAL PRICE AND DELIVERY TIMES - WE WANT TO ENSURE YOU GET THE CORRECT CUSTOM DISK. QLOAD.RJD@GMAIL.COM  It takes longer for the upgrade discs as they are custom-generated with your serial number by the programmer in Germany.  Shipping will be USPS priority mail $10.50 (domestic). International rates vary - please ask. (the webcart calculator is not always accurate)

 TO INSTALL - load the new disk. Follow the info included.  Now Your new version works with Windows XP, VISTA, 7, 8 and 10.

Note: Win 10 requires slightly different install, so see the included install info.

If you have Version 3.6 or newer and now have W-10, please se FAQ and/or go to:   https://www.neconos.com/install-quickload/   

 WIN 11 Users - Intell and AMD processors - the software is compatible and runs properly, but please refer to the FAQs.

WIN 11 Users with ARM processors are NOT compatible and will NOT run the software! 

PLEASE EMAIL TECH SUPPORT AT QLOAD.RJD@GMAIL.COM BEFORE ORDERING SO WE CAN CONFIRM IF YOU INDEED NEED THIS UPGRADE!

BACK IN STOCK!  Permits approved, tarrif/fees paid.....the latest version of QUICKLOAD/QUICKTARGET is now in stock. 

Unfortuately, these fees have forced us to raise the price for the first time in 20+ years.

QuickDESIGN computer aided cartridge design software, is quick and accurate way to create wildcat cartridges from "scratch" or from the huge database in the program. Print out professional, precise drawings in SAAMI or CIP specifications. Take your drawing to a reamer manufacturer and you are ready to go! The information developed in QuickDESIGN can be imported by QuickLOAD so that the user can analyze the design in terms of chamber pressure and velocity. Data sheets are formatted to SAAMI or CIP specs. Drawings can be printed as wire-frame, outline, outline with interior shown, with and without chamber, solid model in colors determined by the user. Windows XP, VISTA, Windows 7, Windows, Windows 8 or Windows 10 required.

NOTE:  Win 11 users - Intel and AMD processors - the sofware is compatible and runs properly.    Win 11 with ARM processors are not compatible and will NOT run the software. 

Shipping to Canada $65 US (due to customs fees)