Accuracy Enhancement Tools

From the makers of the EXD Vertical Reticle. Two sheets of Drop decals in each pack. There are six decals on each sheet. This is a great way to have drop information readily available in the field. Use different loads and have the data at your fingertips. Easily applied to stock or scope. Make sure the area is free of oil or grease before applying. Best if placed where they won't be chafed by clothing, etc. Fill in your drop data with a fine tipped permanent marker. NOTE: these will ship in an envelope for about $3.00  -   ignore the shopping cart's erratic calculator for shipping.

OUT OF STOCK WHILE WE MOVE THE WAREHOUSE

Great way to firelap your muzzle loader. Kit consists of the four abrasives (#220, #400, #800, #1200 grits) in jars. The abrasives are laboratory grade abrasives and in a paste form.      TEMP OUT OF STOCK

The very best way to check the bore for constrictions, loose spots and rough spots is to "feel' the bore. The best way to "feel" the bore is to manually push a slug through the bore. As you push the slug through a well greased bore, you can note where the aberrations occur and mark them on your pushing rod or dowel. As you change grits in the fire lapping process, slug the bore. You will feel the improvement brought about by the firelapping process.   OUT OF STOCK

The CAT,Cartridge Alignment Tool. Now you can accurately correct run-out of your hadloads and factory cartridges. The CAT allow you to do this easily without effecting neck tension or putting damaging pressure on the bullet. No more worries about excessive run-out. Improved accuracy. Eliminate one more cause of the unknown flyer. The CAT,Cartridge Alignment Tool. Now you can accurately correct run-out of your handloads and factory cartridges. The CAT allows you to do this easily without effecting neck tension or putting damaging pressure on the bullet. No more worries about excessive run-out. Improved accuracy. Eliminate one more cause of the unknown flyer.