1. Precision Shooting Resources Categories >

  2. Firearm Lubricants

MOLY-SLIDE is a molybdenum-disulfide dry lubricant that burnishes into metal for a lasting, low-friction film - no oily residue to attract grit.
MOLY-SLIDE - Product Image
Click For Details

MOLY-SLIDE

Our own Molybdenum Disulfide based lubricant. The formulation is patented and utilizes ultra-fine moly in a petroleum base. It is an excellent lube for pivot pins, sears, slides and locking lugs. It is the lubricant used by BUSHMASTER FIREARMS. It is used in assembly and recommended by them for use in their products. It is the recommended product for "seasoning" barrels when moly plated bullets are used. Fouling shots are usually not necessary if MOLY-SLIDE is used to season the bore. A small amount is placed on a tight fitting patch which is then moved back and forth several times rapidly the full length of the bore prior to shooting. Follow this "burnishing patch with a couple of dry patches to clear the barrel.   WILL SHIP IN SMALL FLAT RATE BOX FOR $12.50   (ignore the erratic shopping cart calculator!)  Sorry - USPS has raised their rates again - we've not raised our prices.                  TEMPORARILY OUT OF STOCK while we move the warehouse - shouldn't take long

 

 
 From $8.95

Where to Use MOLY-SLIDE on Firearms

MOLY-SLIDE is commonly used where oil migrates: bolt lugs, sear and hammer surfaces, slide rails, and reloading die interiors. It leaves a dry, anti-galling film that resists flinging off or gumming up in cold and dust.

Dry Moly Lube vs. Oil-Based Lubricants

A dry moly film stays put and resists pressure and heat, making it a good complement to a wet CLP like Weapon Shield. For coating bullets with moly, see the moly plating kits; for case necks, the dry neck lube kit.

 

 

 

Sitemap


www.neconos.com
NECO Cust. Svce.
108 Ardmore Way
Benicia, CA 94510

NECO Warehouse/Main Office
1015 W. Morgan St
Duluth, MN 55811

sales@neconos.com

Cart 7 Shopping Cart